REX-C100 Digital PID Thermostat temperature Controller SSR output K Thermocouple For Sale

REX-C100 Digital PID Thermostat temperature Controller SSR output K Thermocouple


Buy Now

REX-C100 Digital PID Thermostat temperature Controller SSR output K Thermocouple:
$2.49

  • Home
  • Electronic Component
  • Chips
  • Sensor
  • Arduino Module
  • Raspberry Pi
REX-C100 Digital PID Thermostat temperature Controller SSR output K Thermocouple PopularPopular

Product Introduction

1/2 M Type K ThermocoupleTemperature Range:0-800°C.
Thread Diameter:6mm / 0.23\".
Internal Insulation:Fibreglass.
External Shielding:Metal Shield.
Total Length:1M / 39\".
Fork Terminal Spacing: 3.5mm / 0.13\".
Color: As Picture Shown.
Designed with two fork terminal, 6mm thread sensor for accurate measurement.
Works well with temperature controller(not included here), wide measurement range of 0-800 degree celsius.
Size:100cm x 1cm x 1cm - 39.37inch x 0.39inch x 0.39inch.Package Included:1 x 1M/2M Type K ThermocoupleHeat sinkSize:5.7CM X4.6CM X7.8CM
Material:aluminumPackage Included:1 pcSSR-40DASpecification:
Long service life and high reliability.
Highly reliable, compact size designed to offer users maximum simplicity.
Fast switching.
Reduced electromagnetic interference.
Output voltage: AC 24-380V.
Output current: 40A.
Input voltage: DC 3-32V.
Control Method: DC to AC.
Mounting Method: Bolts fixed.
Size:6.5cm x 4.5cm x 2.2cm - 2.56inch x 1.77inch x 0.87inch.

Package Included:
1 x SSR-40 DA Solid State Relay Module Normal SSR outputNotes:
1.REX-C100 only K-type thermocouples can be used as input.
2.All input voltages are 220V
3.Normal version output has no alarm function

Parameter:
1. Measurement accuracy: ± 0.5% FS
2. Cold junction compensation tolerance: ± 2 ℃ (can be modified by software within 0 ~ 50 ℃)
3. Resolution: 14 bits
4. Sampling cycle: 0.5 seconds
5. Power supply: AC 100-240V 50 / 60HZ
6. Process value (PV), set value (SV)
7. Output and self-tuning can be via: LED indication
8. PIN control (including ON / OFF, step PID and continuous PID)
9. Self-tuning control
10. Relay output: contact capacity 250V AC 3A (resistive load)
11. Proportional band (P): 0 to full range (ON / OFF control when set to 0 )
12. PID temperature controller detection temperature range: 0 to 999 ° C (probe sensor temperature range 0 to 400 ° C)
13. Insulation resistance:> 50M ohm (500V DC)
14. Insulation resistance: 1500V AC / min
15. Insulation resistance : power consumption <10 VA
16. Operating environment: 0 ~ 50 ℃
17. No corrosive gas environment 30 ~ 85% RH
18. Features short and precise welding,full intelligent function temperature measurement, constant temperature controlUse:
General precision temperature control equipment, such as oven power chemical industry, injection packaging food, incubator, oven, etc. Important temperature control accessories are universalPacakge included:
1*REX-C1001M/2MsetPacking list:
A 1M/2M K type sensor
A Thermostat
A SSR 40DA relay
A Heat Sink
A Clear Plastic Cover
  • Payment must be received in 5 business days of sale closing.
  • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
  • We maintain high standards of excellenceand strive for 100% customer satisfaction!response is very important to us. We request that you contact us immediately BEFORE you give us neutralor negativeresponse, so that we can satisfactorily address your concerns.
Refund
  • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can\'t take a refund.
  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
  • Home
  • Electronic Component
  • Chips
  • Sensor
  • Arduino Module
  • Raspberry Pi
REX-C100 Digital PID Thermostat temperature Controller SSR output K Thermocouple

Product Introduction

1/2 M Type K ThermocoupleTemperature Range:0-800°C.
Thread Diameter:6mm / 0.23\".
Internal Insulation:Fibreglass.
External Shielding:Metal Shield.
Total Length:1M / 39\".
Fork Terminal Spacing: 3.5mm / 0.13\".
Color: As Picture Shown.
Designed with two fork terminal, 6mm thread sensor for accurate measurement.
Works well with temperature controller(not included here), wide measurement range of 0-800 degree celsius.
Size:100cm x 1cm x 1cm - 39.37inch x 0.39inch x 0.39inch.Package Included:1 x 1M/2M Type K ThermocoupleHeat sinkSize:5.7CM X4.6CM X7.8CM
Material:aluminumPackage Included:1 pcSSR-40DASpecification:
Long service life and high reliability.
Highly reliable, compact size designed to offer users maximum simplicity.
Fast switching.
Reduced electromagnetic interference.
Output voltage: AC 24-380V.
Output current: 40A.
Input voltage: DC 3-32V.
Control Method: DC to AC.
Mounting Method: Bolts fixed.
Size:6.5cm x 4.5cm x 2.2cm - 2.56inch x 1.77inch x 0.87inch.

Package Included:
1 x SSR-40 DA Solid State Relay Module Normal SSR outputNotes:
1.REX-C100 only K-type thermocouples can be used as input.
2.All input voltages are 220V
3.Normal version output has no alarm function

Parameter:
1. Measurement accuracy: ± 0.5% FS
2. Cold junction compensation tolerance: ± 2 ℃ (can be modified by software within 0 ~ 50 ℃)
3. Resolution: 14 bits
4. Sampling cycle: 0.5 seconds
5. Power supply: AC 100-240V 50 / 60HZ
6. Process value (PV), set value (SV)
7. Output and self-tuning can be via: LED indication
8. PIN control (including ON / OFF, step PID and continuous PID)
9. Self-tuning control
10. Relay output: contact capacity 250V AC 3A (resistive load)
11. Proportional band (P): 0 to full range (ON / OFF control when set to 0 )
12. PID temperature controller detection temperature range: 0 to 999 ° C (probe sensor temperature range 0 to 400 ° C)
13. Insulation resistance:> 50M ohm (500V DC)
14. Insulation resistance: 1500V AC / min
15. Insulation resistance : power consumption <10 VA
16. Operating environment: 0 ~ 50 ℃
17. No corrosive gas environment 30 ~ 85% RH
18. Features short and precise welding,full intelligent function temperature measurement, constant temperature controlUse:
General precision temperature control equipment, such as oven power chemical industry, injection packaging food, incubator, oven, etc. Important temperature control accessories are universalPacakge included:
1*REX-C1001M/2MsetPacking list:
A 1M/2M K type sensor
A Thermostat
A SSR 40DA relay
A Heat Sink
A Clear Plastic Cover
  • Payment must be received in 5 business days of sale closing.
  • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
  • We maintain high standards of excellenceand strive for 100% customer satisfaction!response is very important to us. We request that you contact us immediately BEFORE you give us neutralor negativeresponse, so that we can satisfactorily address your concerns.
Refund
  • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can\'t take a refund.
  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

On Apr 26, 2024 at 10:05:04 PDT, seller added the following information:



Buy Now


Fatal error: Call to undefined function MagicParser_parse() in /home/leenooks/public_html/store/relateditems.php on line 73