LCD Digital Multimeter Voltmeter Ammeter Ohmmeter Volt AC DC Tester Leads Meter For Sale
LCD Digital Multimeter Voltmeter Ammeter Ohmmeter Volt AC DC Tester Leads Meter:
LCD Digital Multimeter Voltmeter Ammeter Ohmmeter Volt AC DC Tester Leads Meter
The multimeter is one of the most basic skills in electronics. It is a good assistant to test and troubleshoot faults that exist in electronic device. This Digital LCD Multimeter Voltmeter Ohmmeter Ammeter will meet your demands. Adopting durable material, it is tough enough to be used for a long time. Besides, it can be used in measuring remaining capacity of the rechargeable battery, so as to check whether the battery is fully-charged.
FRONT PANEL DESCRIPTION1. FUNCTION AND RANGE SWITCH
This switch is used to select the function ano desired range as well as to turn on the instrument.To extend the life of this battery, the switch should be in the "OFF" position when the nstrument is not in use.
3½ digit, 7 segment, 0.5" high LCD.
3. "Common" JACK
Plug in connector for black (negative) test lead
4. "VQmA" JACK
Plug in connector for red (Positive) test lead for all voltage and resistance and current (except 10A) measurements.
5. "10A JACK
Plug in connector to red (positive) test lead for 10A measurement.
TECHNNICAL SPECIFICATIONSAccuracy: ±a% of reading: ± N0 digits.
Environmental temperature : 23℃±2℃.
Relative Humidity: <75%.
Specifications:1. DC Voltage: 200mV-600V ±(0.5％±2dgts)
2. AC Voltage: 200/600V ±(1.2％±10dgts)
3. DC Current: 2mA-10A ±(1.0%+2dgts)
4. Resistance: 200Ω－2MΩ ±(0.8％±3dgts)
5. Power supply: 9V battery,NEDA 1604 6F22 type. (battery not included)
6. Max. display: 1999
7. Diode: Yes
8: Dynatron: Yes
9. LCD: Yes
10: Continuity Buzzer: Yes (resistance lower than 30Ω±20Ω)
11: Input Impedance for DCV: 1MΩ
12: Sample Rate: 3times/S
13: Low Battery Indication: Yes
14: Data Hold: Yes
1.Pls do not change the inner circuit to aviod damaging the ammeter
2.Do not connect it to the voltage over 1000VDC or 750VAC
3.Make sure not connect the error measure range
4.Pls do not use the ammeter if the back cover is wrong
5.Pls remove the pen and cut off the power before replacing battery and fuze
6.Do not directly plug into the socket to measure the current; otherwise, the meter will be damaged7.Please read the instructions for specific measurement methods
Package Included1 x Digital LCD Multimeter Voltmeter Ohmmeter Ammeter (Battery Not Included)
2 x Test Leads
1 x English Manual
1 x Packing Box
Fatal error: Call to undefined function MagicParser_parse() in /home/leenooks/public_html/store/relateditems.php on line 73